Finished Product

AR-8941L

Human

Foot and Ankle

Product

The new Lisfranc Plates were designed to provide fixation for acute Lisfranc injuries and fusions of the tarsal-metatarsal joints. The unique design allows for compression along the Lisfranc ligament and visualization of the healing process during recovery. At 1.4 mm maximum thickness, the plates provide minimal prominence and low profile contouring. These plates are available in three different sizes with both left and right options.
<ul>
 <li>Eliminates the joint damage that may occur with the use of screws and guide wires while allowing visualization of the Lisfranc joint</li>
 <li>Bridge-plating preserves the joint surfaces and results in larger surface area for bony fusion</li>
 <li>Contoured to fit the first and second metatarsal cuneiform joints and compresses along the Lisfanc ligament</li>
 <li>Allows room for normal interfragmentary screw placement</li>
</ul>

Lisfranc Plates

Child (D)

The plantar Lapidus plate was designed to provide fixation for a Lapidus procedure. The plate is placed plantar on the 1st tarsometatarsal (TMT) joint and is fixed with two 3.5 mm locking screws at both the distal and proximal ends to optimize construct strength. The precontoured left and right plates allow secure plantar placement and spare the tibialis anterior tendon. The plantar Lapidus plate provides compression over the entire arthrodesis area using a solid 4.0 mm compression screw through the plate. The plantar orientation avoids gapping of the arthrodesis site during early weightbearing.1
 
 
Reference
1. Klos K, Simons P, Hajduk AS, et al. Plantar versus dorsomedial locked plating for Lapidus arthrodesis: a biomechanical comparison.&nbsp;Foot Ankle Int. 2011;32(11):1081-1085. doi:10.3113/FAI.2011.1081

Plantar Lapidus Plate

The Arthrex CFS plating system combines many of our current midfoot, forefoot, and hindfoot plate and screw systems into one set (AR-8950S). The set is conveniently divided into 2.4/3.0 mm and 3.5/4.0 mm (AR-8950S-01 and AR-8950S-02) modules that house the new Metatarsal Plates, TMT Plates, x-Plates, and newly revised H-Plates. Also included in the set are the Lapidus, Lisfranc, Opening Wedge, and MTP Plates. Screws are provided in locking and nonlocking options for 2.4 mm, 3 mm, 3.5 mm, and 4 mm sizes along with 3 mm and 4 mm cannulated screws. Presenting all of these components in one set gives surgeons the flexibility to choose the ideal plating system for any need. In addition, the new Mini Joint Distractor offers greater flexibility for joint preparation, visualization, and intraoperative compression of the fracture or fusion site.

Comprehensive Fixation System

Comprehensive Fixation System, 3.5 / 4.0 mm Instrument Set

Instrumentenset, für Fixierungskomplettsystem, 3.5 mm / 4 mm

3.5/4.0 mm Comprehensive Modular Foot Set

Comprehensive Fixation Set, Common Instruments Set

Standardinstrumentenset, für Fixierungskomplettsystem

Common Istrument Set, Comprehensive Modular Foot System

Procedure

The Lapidus procedure is an arthrodesis of the 1st metatarsocuneiform joint. It is performed most commonly as a method to reduce the intermetatarsal angle (IMA) in the setting of hypermobility or arthritis of the 1st metatarsocuneiform joint.

Lapidus Hallux Valgus Correction

Arthrex has a wide array of midfoot plating options housed in the CFS set. The surgeon can choose from specific TMT plates, H-plates, Lapidus plates, dorsal midfoot fusion plates, medial column plates, or mesh plates. The instrumentation for these implants is straightforward and easy to use, assisting the surgeon with distraction, provisional fixation, and other elements of the procedure.

Low Profile Lapidus Plate, Long

AR-8941L

Related Pages

Foot and Ankle

Lisfranc Plates

Product

Foot and Ankle

Plantar Lapidus Plate

Product

Foot and Ankle

Comprehensive Fixation System

Product

Foot and Ankle

Lapidus Hallux Valgus Correction

Procedure

Foot and Ankle

Midfoot Plating Module

Product