Low Profile Locking Screw, Titanium, 3.5 mm x 36 mm

Winkelstabile Schraube, Titan, 3.5 mm x 36 mm

Low Profile Locking Screw, Titanium, 3.5 x 36 mm

Tornillo de bloqueo de bajo perfil, titanio, 3,5 mm x 36 mm

PARAFUSO BLOQUEADO DE BAIXO PERFILTM, TI, 3.5MM X 36MM

Finished Product

AR-8935L-36

Human

Foot and Ankle

Product

The new Calcaneus Step Plate, designed by leading foot and ankle surgeons, is designed to dial-in the desired correction with incremental steps of 5 mm, 7.5 mm, and 10 mm. 
<ul>
 <li>Plates create a firm buttress to prevent redisplacement of a calcaneal sliding osteotomy</li>
 <li>Quick technique which requires little to no fluoroscopy for insertion</li>
 <li>Patient satisfaction may be improved due to not violating the heel pad with an incision or a screw</li>
 <li>Provides rigid fixation with an added dynamic slide compression slot for solid bone-to-bone contact</li>
</ul>

Calcaneus Step Plate

Child (D)

The Arthrex CFS plating system combines many of our current midfoot, forefoot, and hindfoot plate and screw systems into one set (AR-8950S). The set is conveniently divided into 2.4/3.0 mm and 3.5/4.0 mm (AR-8950S-01 and AR-8950S-02) modules that house the new Metatarsal Plates, TMT Plates, x-Plates, and newly revised H-Plates. Also included in the set are the Lapidus, Lisfranc, Opening Wedge, and MTP Plates. Screws are provided in locking and nonlocking options for 2.4 mm, 3 mm, 3.5 mm, and 4 mm sizes along with 3 mm and 4 mm cannulated screws. Presenting all of these components in one set gives surgeons the flexibility to choose the ideal plating system for any need. In addition, the new Mini Joint Distractor offers greater flexibility for joint preparation, visualization, and intraoperative compression of the fracture or fusion site.

Comprehensive Fixation System

Comprehensive Fixation System, 3.5 / 4.0 mm Instrument Set

Instrumentenset, für Fixierungskomplettsystem, 3.5 mm / 4 mm

3.5/4.0 mm Comprehensive Modular Foot Set

Low Profile Lapidus Plate, Titanium

Comprehensive Fixation Set, Common Instruments Set

Standardinstrumentenset, für Fixierungskomplettsystem

Common Istrument Set, Comprehensive Modular Foot System

Designed to provide excellent fixation for fusions and osteotomies, these plates offer the foot and ankle surgeon a comprehensive option for procedures in the midfoot. These additions to the Low Profile Plating System come with and without wedge blocks, and in a variety of lengths to fixate lateral column lengthenings, calcaneocuboid arthrodesis, talonavicular arthrodesis and other less common procedures.&nbsp;
Features &amp; Benefits: 

<ul>
 <li>Left or Right Slants - Fits a variety of indications.</li>
 <li>Wedge Option - Wedges save OR time and eliminate the need to harvest a tricortical wedge from the iliac crest.</li>
 <li>Locking Option - The outermost holes allow the surgeon to choose a fixed-angle locking or variable-angle nonlocking option, depending on the needs of the patient.</li>
 <li>Compression Option - The inner slots generate compression when drilled eccentrically in arthrodesis applications.</li>
 <li>Minimized Profile - Low profile plates and screw heads reduce soft tissue irritation and the need for removal.</li>
 <li>Anatomic Contour - Optimizes construct strength, simplifies surgical technique and reduces soft tissue irritation.</li>
 <li>Screw Options - 3.5 mm cortical, 3.5 mm cortical locking and 4 mm cancellous.</li>
</ul>

H-Plates

Procedure

The Lapidus procedure is an arthrodesis of the 1st metatarsocuneiform joint. It is performed most commonly as a method to reduce the intermetatarsal angle (IMA) in the setting of hypermobility or arthritis of the 1st metatarsocuneiform joint.

Lapidus Hallux Valgus Correction

Arthrex has a wide array of midfoot plating options housed in the CFS set. The surgeon can choose from specific TMT plates, H-plates, Lapidus plates, dorsal midfoot fusion plates, medial column plates, or mesh plates. The instrumentation for these implants is straightforward and easy to use, assisting the surgeon with distraction, provisional fixation, and other elements of the procedure.

Midfoot Plating Module

Trauma Lower Extremities

The Arthrex Pilon Fusion System is an expansion to the Arthrex Ankle Fusion Plating System that adds to the Arthrex portfolio for the following procedures:
<ul>
 <li>Distal tibia fractures that require fracture reduction and primary ankle arthrodesis</li>
 <li>Primary ankle fusions that necessitate additional screw options or plate lengths</li>
 <li>Revision ankle arthrodesis for failed primary fusions, hindfoot nails, or total ankle replacement</li>
</ul>
Severe damage to the tibiotalar (TT) joint often results in posttraumatic arthritis, pain, stiffness, and non-unions that require secondary surgeries. The Pilon Fusion System provides another option to address these severe scenarios with primary TT arthrodesis of the articular surface to potentially avoid additional surgery and chronic pain.
Anterolateral and posterior approaches, depending on the fracture pattern and/or soft-tissue condition, allow for fracture management, lengthy bridging techniques, anatomic implants, and fracture-specific locking configurations.

Pilon Fusion Plating System

Trauma Upper Extremities

The Arthrex Pilon Fusion System is an expansion to the Arthrex Ankle Fusion Plating System that adds to the Arthrex portfolio for the following procedures:
<ul>
 <li>Distal tibia fractures that require fracture reduction and primary ankle arthrodesis</li>
 <li>Primary ankle fusions that necessitate additional screw options or plate lengths</li>
 <li>Revision ankle arthrodesis for failed primary fusions, hindfoot nails, or total ankle replacement</li>
</ul>
 
Severe damage to the tibiotalar (TT) joint often results in posttraumatic arthritis, pain, stiffness, and nonunions that require secondary surgeries. The Pilon Fusion System provides another option to address these severe scenarios with primary TT arthrodesis of the articular surface to potentially avoid additional surgery and chronic pain.
 
Anterolateral and posterior approaches, depending on the fracture pattern and/or soft-tissue condition, allow for fracture management, lengthy bridging techniques, anatomic implants, and fracture-specific locking configurations.

The plantar Lapidus plate was designed to provide fixation for a Lapidus procedure. The plate is placed plantar on the 1st tarsometatarsal (TMT) joint and is fixed with two 3.5 mm locking screws at both the distal and proximal ends to optimize construct strength. The precontoured left and right plates allow secure plantar placement and spare the tibialis anterior tendon. The plantar Lapidus plate provides compression over the entire arthrodesis area using a solid 4.0 mm compression screw through the plate. The plantar orientation avoids gapping of the arthrodesis site during early weightbearing.1
 
 
Reference
1. Klos K, Simons P, Hajduk AS, et al. Plantar versus dorsomedial locked plating for Lapidus arthrodesis: a biomechanical comparison.&nbsp;Foot Ankle Int. 2011;32(11):1081-1085. doi:10.3113/FAI.2011.1081

Plantar Lapidus Plate

Arthrex offers a wide variety of solutions in our ankle fracture portfolio, including titanium plating options. Plate offerings include locking third tubular plates, 3.5 mm reconstruction plates, and the locking distal fibular plate. Each plate is designed for use with the Syndesmosis TightRope® XP implant and includes a compression hole in the proximal shaft of the plate. The distal fibular plate also includes 3.0 mm variable-angle locking screws distally and suture eyelets for the addition of the AITFL InternalBrace™ ligament augmentation procedure.
 
The InternalBrace surgical technique is intended only to augment the primary repair/reconstruction by expanding the area of tissue approximation during the healing period and is not intended as a replacement for the native ligament. The InternalBrace technique is for use during soft tissue-to-bone fixation procedures and is not cleared for bone-to-bone fixation.&nbsp;

Titanium Ankle Fracture System

Arthrex offers a wide variety of solutions in our ankle fracture portfolio, including titanium plating options. Plate offerings include:
<ul>
 <li>Locking straight plates</li>
 <li>Locking third tubular plates&nbsp;</li>
 <li>3.5 mm locking compression plates</li>
 <li>3.5 mm reconstruction plates</li>
 <li>Locking distal fibular plates</li>
 <li>Posterior/Fragment-specific plates</li>
 <li>Posterolateral plates</li>
 <li>Hook plates</li>
</ul>
 
Each plate is designed for use with the Syndesmosis TightRope® XP implant and includes a compression hole in the proximal shaft of the plate. The distal fibular plate also includes 3.0 mm variable-angle locking screws distally and suture eyelets for the addition of the AITFL InternalBrace™ ligament augmentation procedure.
 
The InternalBrace surgical technique is intended only to augment the primary repair/reconstruction by expanding the area of tissue approximation during the healing period and is not intended as a replacement for the native ligament. The InternalBrace technique is for use during soft tissue-to-bone fixation procedures and is not cleared for bone-to-bone fixation.&nbsp;

Low Profile Locking Screw, Titanium, 3.5 mm x 36 mm

AR-8935L-36

Related Pages

Foot and Ankle

Calcaneus Step Plate

Product

Foot and Ankle

Comprehensive Fixation System

Product

Foot and Ankle

H-Plates

Product

Foot and Ankle

Lapidus Hallux Valgus Correction

Procedure

Foot and Ankle

Midfoot Plating Module

Product

Foot and Ankle

Pilon Fusion Plating System

Product

Trauma Upper Extremities

Pilon Fusion Plating System

Procedure

Foot and Ankle

Plantar Lapidus Plate

Product

Trauma Lower Extremities

Titanium Ankle Fracture System

Product

Trauma Upper Extremities

Titanium Ankle Fracture System

Procedure