Graft Sizing Block, 4.5-12 mm holes in 0.5 mm increments

Sehnenstärketester, 4.5 mm - 12 mm Löcher, in 0.5 mm Schritten

Graft Sizing Block, 4.5-12 mm holes in 0.5 increments

Bloque de medición de injerto, orificios de Ø 4.5-12 mm conincrementosde

BLOCO DE AJUSTE DE TAMANHO DE ENXERTO ORIFICIOS DE 6-12 MM EM GRADACOESDE 0.5

Finished Product

AR-1886

Human

AR-2950AP

AR-2950BH

Base GraftPro de la unidad de preparación de injertos

AR-2950D

GraftPro, placa de preparação de enxert

GraftPro, Graft Preparation Instrument Case

CAIXA DE INSTRUMENTAL DE PREPARACAO DE ENXERTO GRAFTPRO

AR-2950DC

AR-2950GH

AR-2950GT

AR-2950SC

AR-2950DS

Knee

Product

Decades of graft preparation experience and feedback from surgical teams have culminated in the&nbsp;GraftPro&nbsp;graft preparation system. The&nbsp;GraftPro system has numerous features that simplify and accelerate graft preparation of soft-tissue, BTB, QuadLink™, and GraftLink® grafts.

GraftPro™ Graft Preparation System 

Child (D)

Procedure

Arthrex offers a comprehensive selection of fixation devices for a variety of bone-patellar tendon-bone (BTB) graft techniques. These options include adjustable, continuous-loop suspensory fixation, and interference screws in a variety of materials. The TightRope® implant, which has been used in 2 million procedures globally,1 was designed to simplify ACL reconstruction and facilitate advanced techniques, such as the GraftLink® technique. BioComposite FastThread™ interference screws, which are composed of time-tested material with more than a decade of clinical success and implantation, allow for faster screw insertion and better graft protection.2
References
1. Arthrex, Inc. Data on file (sales data as of September 18, 2018). Naples, FL; 2018.
2. Arthrex, Inc. LA1-0199-EN_E. Naples, FL; 2018.
Please note that certain bio (PLLA) anchors and screws are not available for sale in EMEA.

BTB Autograft ACL Reconstruction 

Many products are available to assist the surgeon with bone-tendon-bone (BTB) graft harvesting and preparation. 

 
 
The parallel graft knife—with parallel blades to create a precise cut in a single pass—is designed for harvesting the patellar or quadriceps tendon during an ACL or a PCL reconstruction. 
 

 
Graft harvesting cutting guides and saw blades can harvest an ideal trapezoidal-shaped bone plug with predrilled suture holes from both the patella and the tibia; the cutting guides provide consistent, reproducible 
results during tendon harvest. 
 

 
Additional instrumentation for BTB graft preparation, including a graft harvesting osteotome and ACL graft shaper, are also available.&nbsp;

BTB Graft Harvest and Preparation Instruments

The FiberTag TightRope implant facilitates attachment of single-ended grafts, such as quad tendon grafts, to the ACL TightRope RT and ABS implants. FiberTag suture is integrated into the TightRope implant for a strong,1 consistent connection between the suture and TightRope loop. A simplified suturing technique, along with innovative packaging and the new GraftClamp graft preparation instrument, make preparing quadriceps tendon grafts faster and more reproducible than ever.
Reference
1. Arthrex, Inc. LA1-000023-EN_A. Naples, FL; 2020.

FiberTag® TightRope® Implant

Arthrex offers the most advanced techniques and instruments for hamstring harvesting and preparation for ACL reconstruction. A reproducible harvest can be performed through a traditional anterior or posterior approach using the minimally invasive hamstring harvest technique and specialized tendon strippers.
The GraftLink®&nbsp;technique provides an anatomic, minimally invasive, and reproducible ACL reconstruction procedure. When used in combination with anatomic guides, the FlipCutter® III drill allows independent femoral and tibial "retrodrilling" to create sockets while maintaining the cortices to maximize fixation. Femoral and tibial TightRope® II implants, with a proprietary 5-point locking system, make the GraftLink technique the most reproducible ACL reconstruction available.
Anatomic: Independent tibial and femoral socket preparation with FlipCutter III reamer and/or low-profile reamers facilitate unconstrained placement of the ACL graft.
Minimally Invasive: Socket preparation with the FlipCutter III reamer limits soft-tissue dissection and helps preserve bone and periosteum.
Reproducible: The GraftPro® graft prep system simplifies graft preparation; the tapered graft and adjustable ACL TightRope II buttons facilitate graft passing, fine tuning of graft depth, and graft tensioning from the femoral and tibial sides.

Hamstring Autograft ACL Reconstruction

Arthrex offers the most advanced techniques and instruments for hamstring harvesting and preparation. Harvesting can be accomplished safely and reproducibly both from the traditional anterior approach or through a posterior approach using the minimally invasive hamstring harvest technique and specialized tendon strippers. 
 

The Arthrex Graft Prep Station offers a variety of interchangeable clamps and posts to facilitate graft tensioning and suturing. 
 

Graft preparation has been revolutionized with the FiberLoop® line of suture and SpeedWhip™ technique. The continuous loops of #2 or #0 suture and free-floating straight or curved needles allow reproducible graft suturing in half the time of traditional straight sutures.

Hamstring Graft Harvest and Preparation Instruments

MCL reconstruction is typically performed when the MCL is severely injured or in cases of chronic MCL laxity. During an MCL reconstruction, autograft or allograft tissue is used to reconstruct the injured ligament. Graft-fixation technology for MCL reconstruction has evolved from staples, posts and washers, and interference screws to less invasive and easier-to-use suspensory fixation, including the TightRope® implant, and 
all-suture anchor technology, such as the Knee FiberTak® anchor.&nbsp;
Adding the InternalBrace™ technique to an MCL repair may result in lower failure rates and less residual laxity post-op as well as shorter immobilization times and faster return to play.1 Additionally, FiberTape® suture has been used for more than 15 years in more than 4 million cases, including tendon and ligament-bridging repairs.
The InternalBrace surgical technique is intended only to support the primary repair and is not intended as a replacement for the standard of care using biologic augmentation in a primary repair.&nbsp;The InternalBrace surgical technique is intended only for soft-tissue-to-bone fixation and is not cleared for bone-to-bone fixation.
Reference
 
1. van Eck CF, Nakamura T, Price T, Linde M, Smolinski P. Suture tape augmentation improves laxity of MCL repair in the ACL reconstructed knee.&nbsp;Knee Surg Sports Traumatol Arthrosc. 2021;29(8):2545-2552. doi:10.1007/s00167-020-06386-7

Medial Collateral Ligament (MCL) Reconstruction

PCL injuries occur during sports-related activities or high-velocity, traumatic accidents. Indications for operative treatment of PCL tears include acute injuries, active young patients, and either isolated grade 3 tears or combined injuries, such as a grade 2 injury with posterolateral corner instability. 

Arthrex developed several techniques for isolated PCL injuries—including PCL inlay reconstruction, double-bundle PCL reconstruction, and the transtibial PCL RetroConstruction™ procedure—that can be combined with multiligament or posterolateral corner reconstruction.&nbsp;
Additionally, a comprehensive line of PCL reconstruction instrumentation is available for a variety of PCL reconstruction techniques, as well as autografts and allografts and single- or double-bundle options.

Posterior Cruciate Ligament (PCL) Reconstruction

Quadriceps tendon grafts offer unique benefits for cruciate ligament reconstruction, such as a predictably large diameter, low morbidity,1 and a preferable stiffness profile for knee ligament reconstruction.
The QuadPro™ tendon harvester is designed to harvest a quadriceps or patellar tendon graft using a minimally invasive technique.2-4 The sharp tip cores out an approximate cylindrical graft. The harvester's ergonomically designed handle features graduations on the clear shaft to allow visualization of approximate graft length during harvesting. Available in four sizes (8 mm to 11 mm), the QuadPro tendon harvester can accommodate each patient’s unique needs as well as the surgeon’s preference for graft diameter.
The FiberTag® TightRope® implant facilitates attachment of single-ended grafts, such as quadriceps tendon grafts, to the ACL TightRope RT and ABS implants. FiberTag suture is integrated into the TightRope implant for a strong, consistent connection between the suture and TightRope loop. A simplified suturing technique, along with innovative packaging and the GraftClamp graft preparation instrument, make preparing quadriceps tendon grafts faster and more reproducible than ever.
References
1. Arthrex, Inc. LA1-00100-EN_K. Naples, FL; 2021.
2. Xerogeanes JW, Mitchell PM, Karasev PA, Kolesov IA, Romine SE. Anatomic and morphological evaluation of the quadriceps tendon using 3-dimensional magnetic resonance imaging reconstruction: applications for anterior cruciate ligament autograft choice and procurement. Am J Sports Med. 2013;41(10):2392-2399. doi:10.1177/0363546513496626
3. Hadjicostas PT, Soucacos PN, Berger I, Koleganova N, Paessler HH. Comparative analysis of the morphologic structure of quadriceps and patellar tendon: a descriptive laboratory study. Arthroscopy. 2007;23(7):744-750. doi:10.1016/j.arthro.2007.01.032
4. Krebs N, Yaish A, O’Neill N. Anatomic evaluation of the quadriceps tendon in cadaveric specimens: application for anterior cruciate ligament reconstruction graft choice. SMRJ. 2019;4(1):7961. doi:10.51894/001c.7961

Quad Tendon Autograft ACL Reconstruction

Tenotomo/Cortador de tendón del cuádriceps, 8 mm

Tenotomo/Cortador de tendón del cuádriceps, 9 mm

Tenotomo/Cortador de tendón del cuádriceps, 10 mm

Tenotomo/Cortador de tendón del cuádriceps, 11 mm

Arthrex pioneered quadriceps tendon (QT) autograft harvesting in 2014 with the minimally invasive QT harvest instrument set, which was designed for a much easier and more reproducible QT harvest. The next evolution in graft harvesting for ACL reconstruction, the QuadPro™ tendon harvester was specifically engineered to allow for efficient, safe graft harvesting while reducing the morbidity and challenges associated with traditional quad harvesting techniques.

GraftPro Graft Preparation Set

AR-2950DS

Items in Set (8)

Items in Set (8)

AR-1886

AR-2950AP

AR-2950BH

AR-2950D

AR-2950DC

AR-2950GH

AR-2950GT

AR-2950SC

Related Pages

Knee

GraftPro™ Graft Preparation System

Product

Knee

BTB Autograft ACL Reconstruction

Procedure

Knee

BTB Graft Harvest and Preparation Instruments

Product

Knee

FiberTag® TightRope® Implant

Product

Knee

Hamstring Autograft ACL Reconstruction

Procedure

Knee

Hamstring Graft Harvest and Preparation Instruments

Product

Knee

Medial Collateral Ligament (MCL) Reconstruction

Procedure

Knee

Posterior Cruciate Ligament (PCL) Reconstruction

Procedure

Knee

Quad Tendon Autograft ACL Reconstruction

Procedure

Knee

Quad Tendon Harvest and Preparation

Product

FiberTag^® TightRope^® Implant