Fishmouth Spear, Trocar Tip Obturator, Reusable

Speer, für 3.7 mm SutureTak und 3.5 mm PushLock, wiederverwendbar

Spear, for 3.7 mm SutureTak and 3.5 mm PushLock, Trocar Tip Obturator

Guía de broca para SutureTak de Ø 3.7 mm y PushLock de Ø3.5 mm, obtura

LANCETA PARA SUTURETAK 3.7 MM E PUSHLOCK 3.5MM

Finished Product

AR-1907

Human

Shoulder

Procedure

The PushLock anchor is designed for simple and secure arthroscopic glenohumeral joint instability repair. The knotless technique saves valuable time and eliminates the possibility of knot impingement. This suture-first technique allows surgeons to independently pass suture through a desired amount of tissue prior to anchor implantation. Multiple suture configurations, including simple cinch and mattress stitches, can be accomplished with FiberWire®, FiberLink® SutureTape, FiberStick™, SutureTape, or LabralTape™ sutures using the Labral Scorpion™ or QuickPass™ SutureLasso™ suture passers. Tissue tension can be visualized and adjusted, if necessary, prior to final anchor implantation.
Please note that certain bio (PLLA) anchors and screws are not available for sale in EMEA.

PushLock® Anchor Instability Technique

Child (D)

Product

The screw-in, knotless Labral SwiveLock anchor is specially designed for treating shoulder instability and is used similar to a Labral PushLock® anchor. Offering the same knotless advantages as the Labral PushLock anchor (eg, low profile, quick, suture-first technique with multiple stitch configuration options), this anchor provides the added benefits of higher pullout strength and vents that may allow bony ingrowth. The anchor is available in biocomposite or PEEK material.

Labral SwiveLock® Anchor

The 2.6 FiberTak soft anchors are available double- and triple-loaded with SutureTape, complemented by a guided delivery system and 2.6 mm drill or punch to help minimize bone removal. These anchors offer the benefits, clinical experience, and product support surgeons have come to appreciate from Arthrex.
The Knotless 2.6 FiberTak anchor offers a tensionable knotless mechanism, allowing suture tension to be controlled and adjusted under direct visualization.

2.6 FiberTak® Soft Anchor Technique

The PASTA bridge technique allows for the transtendon repair of partial, articular-sided supraspinatus tendon avulsions. This technique simplifies PASTA repair, while providing a secure construct technique that enhances footprint compression to maximize contact between tendon and bone.
The technique can be performed in a knotted or knotless fashion through percutaneous transtendon anchor insertion with no arthroscopic suture passing or knot tying, creating a simple, reproducible technique.

PASTA Repair Technique

Designed for arthroscopic instability or rotator cuff repair, the knotless PushLock suture anchor uniquely allows surgeons to adjust tension on the tissue intraoperatively, ensuring precise tissue reduction and fixation.
PushLock anchors are available in 2.4 mm, 2.9 mm, 3.5 mm, and 4.5 mm sizes. The 2.4 mm and 2.9 mm PushLock anchors are optimized for labral repair. Use the 4.5 mm PushLock anchor for rotator cuff repair using the SutureBridge™ technique and the 3.5 mm PushLock anchor during rotator cuff or instability procedures.
The anchor bodies – available in bioabsorbable biocomposite or PLLA and nonabsorbable PEEK materials – are strong, revisable, and radioluscent implants with no MRI artifact. Each anchor has a PEEK eyelet for superior strength during insertion to allow firm tissue tensioning and shifting.1
Reference
1. Arthrex, Inc. Data on file (APT 985). Naples, FL; 2007.

PushLock® Anchor

The SwiveLock® is a knotless suture anchor designed for arthroscopic glenohumeral joint instability repair. It is sized and used similarly as the 2.9 mm PushLock®, except that the threaded and vented anchor body "twists-in" instead of "taps-in". The anchor provides the ability to independently pass the suture through a desired amount of tissue prior to anchor implantation. This feature allows the surgeon to properly capture the amount of capsule or labrum required for the pathology being treated. The surgeon can visualize and adjust tissue tension prior to final implant installation. The anchor is twisted into its final position and the sutures are cut flush. 

The body of the anchor is available in a BioComposite material that combines PLLA with ß-TCP, or a nonabsorbable thermoplastic material, polyetheretherketone (PEEK). Both are strong, revisable and radiolucent implants. Both versions use a PEEK eyelet for superior strength during insertion to allow firm tissue tensioning and shifting.

SwiveLock® Instability Technique

BioComposite Labral SwiveLock Anchor, 3.5 mm x 15.8 mm

Bio-Composite SwiveLock Fadenanker, 3.5 x 15.8 mm, perforiert

Suture Anchor, BioComposite SwiveLock, 3.5 x 15.8 mm, Vented

Anclaje de sutura, SwiveLock de BioComposite, Ø 3.5 mm x15.8 mm, fenest

ANCORA DE SUTURA BIOCOMPOSTA SWIVELOCK (3.5MM X 15.8MM)

Âncora de sutura, BioComposite SwiveLock

PEEK Labral SwiveLock 3.5 mm x 15.8 mm

PEEK SwiveLock Fadenanker, 3.5 x 15.8 mm, perforiert VE5, steril, IM

Suture Anchor, PEEK SwiveLock, 3.5 mm x 15.8 mm, Vented

Anclaje de sutura, SwiveLock de PEEK, Ø 3.5 mm x 15.8 mm,fenestrado

Âncora de sutura, PEEK SwiveLock, 3.5 mm x 15.8 mm, perfurada

Fishmouth Spear, Trocar Tip Obturator, Reusable

AR-1907

Related Pages

Shoulder

PushLock^® Anchor Instability Technique

Procedure

Shoulder

Labral SwiveLock^® Anchor

Product

Shoulder

2.6 FiberTak^® Soft Anchor Technique

Procedure

Shoulder

PASTA Repair Technique

Procedure

Shoulder

PushLock^® Anchor

Product

Shoulder

SwiveLock^® Instability Technique

Procedure